[KathMonteri]

When it fails to absorb, you might get messages like "g2000 error 5b00". When the ink system does not absorb the ink, an error occurs. The Canon printer's ink system continuously refills the ink tank.

[techsquad2]

If you are a beginner at canon mg3600 wifi setup. You need to follow some simple steps to set up the wireless setup on your printer. Insert all USB cables into the compatible USB port and follow the all-screen msg on display on both device's screens.

[Wai21]

Read the error message carefully to understand what the issue is. Sometimes, error codes are straightforward and indicate a specific problem. Turn off the printer and unplug it from the power source. Wait a few minutes and plug it back in, then turn it on. This can sometimes resolve the error code. You can visit https://assignmentmountains.org/ to know how to write an article. If the error message indicates that there is an issue with the ink or toner cartridges, check them to make sure they are properly installed and have enough ink or toner. Replace any cartridges that are low or empty.

[Beautytalk]

Turn off the printer, unplug it from the power source for a few minutes, and then turn it back on. And make sure the printer is connected to the same network as your device and that the Wi-Fi signal is strong. https://www.tp-link.com/ph/home-networking/deco/