+- Darkky Minecraft Server Forum (https://darkkyshadow.com/forum/secret)
+-- Forum: Player Section (https://darkkyshadow.com/forum/secret/forumdisplay.php?fid=3)
+--- Forum: Player Report/Unban Section (https://darkkyshadow.com/forum/secret/forumdisplay.php?fid=5)
+--- Thread: How to clean the stove (/showthread.php?tid=4786)
How to clean the stove - merehan - 03-29-2022
How to clean gas heads
Gas heads can be cleaned by preparing a set of materials and tools, and then following the steps as follows:
Materials and tools needed:
baking soda jelly liquid. Unused toothbrush. Paper clip. Non-abrasive sponge.
Cleaning method:
The gas burner ceramic disc must be removed, or the butane valve should be closed before starting to clean, then raise the heads and eyes from their places, and soak them in warm water and soap for a period of up to 20-30 minutes, then clean them with a non-abrasive sponge and an unused toothbrush
TRANSLATED FROM:طريقة تلميع الجرانيت
Clean the food residues stuck in the port openings with a paper clip, by inserting it into the hole in a way that does not lead to damage to the metal of the port, and it should be noted that toothpicks are not used in this, as Some wood may be stuck and lead to closing the pathways.
Baking soda can be used to clean gas heads to eliminate the most difficult stains, by mixing equal amounts of water and baking soda, putting the solution on the heads, then rubbing them with a toothbrush and a lint-free, non-abrasive cloth.
This may require gas cleaning to repeat the process over and over, and finally all the pieces are washed with abundant flowing water, then dried well before being reassembled and put in their places.
How to clean the butane rods
The process of cleaning the butane rods requires the availability of some materials and tools, then follow a few steps as follows: Materials and tools: about two liters of water. Half a cup of baking powder. two big spoons of lemon juice. Plastic scrub brush. a piece of cloth.
Cleaning method
The process of cleaning the bars begins with using a plastic brush to scrub off food residues stuck to them, mixing a solution of warm water with half a cup of baking powder and two tablespoons of lemon juice in a plastic bowl, and placing the bars in it
leaving it soaked overnight, or for at least eight hours, followed by cleaning it well with a plastic brush; In order to get rid of combustion residues, and finally the bars are washed with warm water, dried with a cloth cat, and returned to their place.
TRANSLATED FROM:طريقة تلميع الخشب الاسود
Gas bar deep cleaning
The process of deep cleaning the gas rods requires the availability of some materials and tools, then follow a few steps as follows: Materials and tools needed: A plastic bag that fits the size of the gas rods. ammonia; A piece of dry cloth. A piece of cloth for rubbing. Water.
Cleaning method
The cleaning process begins with removing the gas bars, placing each one in a bag, then adding a quarter cup of ammonia and enough water to all the bags so that the bars are completely submerged.
Then close the bags in a way that prevents the leakage of ammonia and water during the necessary soaking period, so that it is preferable that the bars remain in the solution for a whole night, and when they are removed from the bags they are rubbed, washed, and dried