12-24-2018, 12:46 PM
The glass used for the glass curtain wall needs to be safety glass, mainly which include Building Tempered Glass, laminated (glued) tumbler, insulating glass, fireproof magnifying glaas, solar control coated goblet and low-emission coated glass (High Transmission Low-E Glass). The specific selection requirements are as follows:
1. Safety glass need to be used for the drape wall. The thickness from the glass should not be not as much as 6mm. The thickness on the full glass curtain wall rib glass ought not be less than 12mm.
3. The appearance quality in addition to technical index of drift tempered glass onlineused for heat-reflecting coated glass shall stick to the requirements of exceptional products or first-class products inside current national standard "Float Glass".
3. The insulating glass on the curtain wall should possibly be sealed with two programmes.
The insulating glass of the exposed frame curtain wall will probably be made of polysulfide sealant along with butyl sealant. The insulating glass of the semi-hidden frame curtain wall shall be made of silicone structural sealant along with butyl sealant; the coated surface will be the second of the actual insulating glass. Or for the third side.
4, the laminated glass belonging to the curtain wall should become processed by polyvinyl butyral (PVB) picture dry processing of laminated tumbler. The thickness of the particular interlayer film (PVB) with the point-supported glass curtain wall membrane laminated glass shall not be less than 0. 76 mm.
FIVE, tempered glass should stick to the provisions of GB9963 "tempered glass".
HALF A DOZEN. All curtain wall glass really should be edge treated.
1. Safety glass need to be used for the drape wall. The thickness from the glass should not be not as much as 6mm. The thickness on the full glass curtain wall rib glass ought not be less than 12mm.
3. The appearance quality in addition to technical index of drift tempered glass onlineused for heat-reflecting coated glass shall stick to the requirements of exceptional products or first-class products inside current national standard "Float Glass".
3. The insulating glass on the curtain wall should possibly be sealed with two programmes.
The insulating glass of the exposed frame curtain wall will probably be made of polysulfide sealant along with butyl sealant. The insulating glass of the semi-hidden frame curtain wall shall be made of silicone structural sealant along with butyl sealant; the coated surface will be the second of the actual insulating glass. Or for the third side.
4, the laminated glass belonging to the curtain wall should become processed by polyvinyl butyral (PVB) picture dry processing of laminated tumbler. The thickness of the particular interlayer film (PVB) with the point-supported glass curtain wall membrane laminated glass shall not be less than 0. 76 mm.
FIVE, tempered glass should stick to the provisions of GB9963 "tempered glass".
HALF A DOZEN. All curtain wall glass really should be edge treated.